Schultz & Larsen Victory Synthetic .308

The Victory Action 

Using the exact same action for the Synthetic and the Walnut Stocks, it’s simple to switch between the two stocks. Ideal if you have the option to select stock depending on your hunting scenario.

Adjustable Comb

The Victory Synthetic stock has an adjustable comb. The mechanism is spring loaded, so with a turn of the toggle on the right side of the stock, the comb lifts automatically. Adjustable from 0-35mm high.

To set the comb at the desired height, hold the comb in position, tighten the toggle, then press the front of the comb downards to lock in place.

Rubber Inlay Grips

The addition of Rubber Inlay Grips on the pistol grip and forearm are a welcome feature. The grips enhance the grip contact and provide a softer feel when mounting the rifle.

The synthetic grip cap is embossed with the Schultz & Larsen “S&L” logo and nice finishing touch.

Switch Barrel System

The Victory has a switch barrel system allowing the barrel to be changed for any other in its calibre group with just a simple wrench.  The standard bolt can be used with all calibres in the standard calibre group but if changing to a Magnum calibre you will need to change the bolt.

Scope Mounting

The top of the Victory action is milled to accept the Schultz & Larsen ‘Slide & Lock” scope mounts, incorporating Summer and Winter scope position.  For those who prefer a different mount, the action is drilled and tapped to accept Weaver or other bases.  The radius of the action is 17mm and the hole spacing 22mm

Sling Swivels

There are three sling swivel studs pre-fitted to the Victory Synthetic Thumbhole. One on the rear of the stock, just in front of the recoil pad, and two on the front of the forearm. The swivel studs accept sling swivels of 8mm wide, with 3.5mm pin diamter. See our available options in the Accessories Section.

Safe Construction

Safety has top priority with all locking parts designed and tested to withstand at least three times normal load.  In the case of an overload resulting in a primer blow-out or case rupture, the high pressure gas can escape through holes in the front of the action and on the side of the bolt.  This, coupled with the extremely tight fit of the bolt and action, ensures that the shooter is not injured.

The safety catch is three position and locks the bolt and blocks the firing pin.  The centre position allows unloading of the rifle whilst the safety is engaged.

The Victory Bolt

The bolt lift is 60º making it a fast an effective mechanism. The Victory’s bolt handle sweeps backwards to match the overall elegant look of the rifle. The perfectly machined bolt glides into the action effortlessly and locks into the barrel once closed. There are two variations of bolt, one is typically marked “S” for Standard Calibres and the other is marked “M” for Magnum Calibres.

Calibres | Standard

Calibres | Magnum (Magnum Bolt Required)

Calibres | Safari